Cold Facts Digital – Page 63 – The go-to place for Cryogenics and Superconductivity

Young Faces: The Next Generation in Cryogenics, Part I

In the Summer 2006 issue of Cold Facts, we debuted a feature story about outstanding young professionals who are active in the cryogenics industry. This year, we again asked the cryogenics community for the names of up-and-coming "young faces." Here is Part I of the third installment of Young Faces,...

Cold Facts Columnists Bring Their Unique Perspectives on Cryogenics

Over the years, Cold Facts has been privileged to have published informed, thoughtful and innovative columns by a series of leaders in the cryogenics industry. Here’s a look back at some of the highlights of the past and a review of our present contributors.

BICEP2 and the Outer Edge of the Universe

The first BICEP (Background Imaging of Cosmic Extragalactic Polarization), BICEP1, observed with 49 spider-web bolometers for three years. BICEP2 carried 256 dual polarization transition-edge superconducting detectors of greatly increased sensitivity, and also observed for three years. Dr. Peter Mason reports here on the results of these two instruments and their...

CERN Launches Study of Future Circular Colliders Beyond the LHC

Dr. Philippe Lebrun and Dr. Laurent Tavian of CERN report on an upcoming study of Future Circular Colliders kicked off in February at the University of Geneva.

The Emerging Science of Deep Cryogenic Treatment

Rozalia Papp, Air Liquide, discusses the history, development, available research, uses and possible applications of Deep Cryogenic Treatment and looks at future prospects from its use.

CSA Members Share Memories of Challenges, Influences in Cryogenics and Superconductivity

CSA recently solicited input from our members and readers about their experiences working in cryogenics and superconductivity. Here are their answers to our survey questions.

Latest in Defining Cryogenics

Dewar

A dewar is a type of cryostat named after Sir James Dewar, the researcher who first developed the concept of a vacuum insulated container with silvered walls to reflect thermal radiation. Dewar was the first to liquefy hydrogen, and he created the device to store his discovery. The thermos bottle...

Stirling and Gifford-McMahon Cryocoolers

Stirling and Gifford-McMahon (GM) cryocoolers are two of the most commonly used cryocoolers in cryogenics. Both devices have a significant industrial base and operate at a wide range of temperatures and capacities. The thermodynamic cycles for both of these cryocoolers are quite similar. The Stirling cycle consists of a compressor,...

Liquefied Natural Gas (LNG)

A significant commercial application of cryogenics is the liquefaction, transport and storage of natural gas. Liquefied Natural Gas (LNG) is generally 95 percent methane with a few percent ethane and much lower concentrations of propane and butane. LNG liquefies at 111.6 K. Unlike many applications of cryogenics, the motivation for...

Latest in Cryo Central

Air Separation and Liquefaction

by Nils Tellier, PE, President, EPSIM Corporation (CSA CSM) nils@epsim.us All illustrations courtesy EPSIM Corporation Background History of Air Separation and Liquefaction This section builds on a rich history of methods to develop deep refrigeration and cryogenic liquefaction during the 19th Century. You are encouraged to read Cryo Central’s History...

Bose-Einstein Condensate

A Bose-Einstein condensate, first proposed in 1925 by Albert Einstein based on work done by Satyendra Nath Bose (the same Bose from whom the term boson is derived), is a super-cold state of matter in which almost all of the individual atoms have “condensed” down to the lowest possible quantum...

Cold Technology for Pest Control

While it does not reach temperatures cold enough to be called cryogenic, carbon dioxide snow is at the heart of a new way of dealing with unwanted pests. It utilizes a quick freezing process that takes advantage of the properties of carbon dioxide snow and has a number of benefits...

Cryogenic Finishing

The following 3 articles discuss the uses and procedures of various type of cryogenic finishing. 1) By Robin A. Rhodes, Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Cryogenic Deflashing is employed to remove undesired residual mold flash that remains on molded parts after they are removed or ejected from the...

Latest in Ask the Experts

Designing a liquid oxygen bath

I’m designing a Liquid Oxygen Bath to place composite coupons in the bath and soak 96 samples for intervals of 8 hours, 24 hours, 7 days, 21 days, 42 days, 62 days and 90 days.

School science projects involving cryogenics and metallurgy?

Can you recommend any school science projects that would involve cryogenics and metallurgy?

Metallic Salts Normally Used to Produce Ultra-Low Temperatures?

Regarding the method known as the Adiabatic Demagnetization of Paramagnetic Salts: What metallic salts are normally used to produce the ultra-low temperatures used for near-absolute-zero cryogenic research? Which salts are the most efficient? Which make the best cooling agents? And which are used most commonly by physicists? I am looking...

Specs and info on turbo expanders

I am a fourth year chemical engineering student doing a design project for the liquefaction of natural gas to DME and we are using a turbo expansion unit. I was wondering whether you would send me some specs and any additional information on turbo expanders that I could use as...

CATEGORIES