NASA Telescopes face budget crisis
As the Space Shuttle made its final flight, another arm of the US space program faces a bleak future.
ADVERTISEMENT
Dippin’ Dots reacts to the marketplace
Would you like your coffee regular, black or pelletized? The question is important to the makers of Dippin’ Dots, those supercold beads of ice cream that are sold largely at ballparks and amusement parks and have become a staple of childhood summers.
CERN/ITER collaboration rescues Japanese magnet project
The iter newsline reports that when the March 2011 earthquake that devastated Japan dramatically disrupted a quality control step in the manufacturing process of the superconducting wires for the ITER magnets, swift action by CERN allowed the verification process to proceed.
US ITER SC magnet contract goes to General Atomics
The US ITER Project Office at Oak Ridge National Laboratory competitively awarded a multi-year contract to General Atomics to produce superconducting magnets for the central solenoid of ITER, an experimental fusion facility that aims to demonstrate the feasibility of fusion energy for the commercial power grid.
US Helium Reserve nearing depletion
Officials at the Federal Helium Reserve, the source of almost half of the US helium supply and more than a third of the world's, say that the reserve could exhaust its supply by 2020.
Hints of Higgs boson detected at Tevatron, LHC
Scientists of the CDF and DZero collaborations at Fermilab continue to increase the sensitivity of their Tevatron experiments to the Higgs particle and narrow the range in which the particle seems to be hiding.
ADVERTISEMENT
Adiabatic Demagnetization Refrigeration
Reaching temperatures below 1K requires different techniques than the various helium gas cycles found in large scale refrigeration plants and small cryocoolers. One of these techniques is Adiabatic Demagnetization Refrigeration (ADR). This technique takes advantage of the fact that the entropy of paramagnetic materials in a magnetic field is lower than...
Cryogen-Free
A cryogen is any fluid that operates at cryogenic temperatures (below roughly 150K – 120K). Using this definition, helium gas at 40K is a cryogen. Another more restrictive definition is to use cryogen to refer specifically to liquids at cryogenic temperatures. This is generally how it is used in the...
Cryostats and Cryocoolers
A cryostat is any device designed to maintain things (including fluids) at cryogenic temperatures. In general usage, cryostats tend to be passive devices rather than providing active cooling. In this usage, cryostats keep things cold by thermally isolating them from room temperature. This generally is accomplished by a combination of...
Air Separation and Liquefaction
by Nils Tellier, PE, President, EPSIM Corporation (CSA CSM) nils@epsim.us All illustrations courtesy EPSIM Corporation Background History of Air Separation and Liquefaction This section builds on a rich history of methods to develop deep refrigeration and cryogenic liquefaction during the 19th Century. You are encouraged to read Cryo Central’s History...
Bose-Einstein Condensate
A Bose-Einstein condensate, first proposed in 1925 by Albert Einstein based on work done by Satyendra Nath Bose (the same Bose from whom the term boson is derived), is a super-cold state of matter in which almost all of the individual atoms have “condensed” down to the lowest possible quantum...
Cold Technology for Pest Control
While it does not reach temperatures cold enough to be called cryogenic, carbon dioxide snow is at the heart of a new way of dealing with unwanted pests. It utilizes a quick freezing process that takes advantage of the properties of carbon dioxide snow and has a number of benefits...
Cryogenic Finishing
The following 3 articles discuss the uses and procedures of various type of cryogenic finishing. 1) By Robin A. Rhodes, Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Cryogenic Deflashing is employed to remove undesired residual mold flash that remains on molded parts after they are removed or ejected from the...
Thermal shock on steel cylinder when dropped into liquid nitrogen
We are a research team at the University of South Florida, studying the “thermal shock” on a steel cylinder when it is dropped into liquid nitrogen. We want to make sure that the thermocouple does not get influenced by the surrounding LN2. Any advice?
Getter materials to absorb out gassed materials?
Here’s one for the scientists: We would like to sell vacuum insulated pipe for high temperature fluid applications. Are there any good getter materials that we can place in the vacuum space of our VJP to absorb outgassed materials at elevated temperatures?
Data on Carbon Fibres Reinforced Plastic at temperatures between 4 and 300K.
I am looking for data on Carbon Fibres Reinforced Plastic at temperatures between 4 and 300K. I would appreciate it if someone could give me some hints on where to find it.
Design of cryostats and suspension mechanisms for insulation and cryostat shielding
I’m looking for information about the design of cryostats and suspension mechanisms for insulation and cryostat shielding.