ICARUS inaugurated at Gran Sasso National Laboratory
The Imaging Cosmic and Rare Underground Signals (ICARUS) experiment was inaugurated at the Gran Sasso National Laboratory in Italy on March 29.
ADVERTISEMENT
Lindgren chosen as Fermilab’s head of Particle Physics Division
Mike Lindgren has been appointed as the head of Fermilab's Particle Physics Division. Lindgren has been a scientist with the lab since 2004, and most recently served as acting head of the division.
Japan’s earthquake brings major science institutions to a standstill
In the wake of the March 11 earthquake that rocked Japan, major science experiments and research institutions are taking stock of the damage to their facilities and dealing with a number of setbacks.
Fermilab’s Alex Romanenko unlocks hidden secrets for improving SRF cavities
Fermilab’s Alex Romanenko recently unlocked secrets hidden beneath the mirror-smooth surface of niobium superconducting radiofrequency (SRF) cavities that may hold the key to the success of future linear colliders. Romanenko’s discovery, which was carried out as part of his doctoral thesis at Cornell University, has earned him “The Particle Accelerator...
UCLA Engineering establishes Endowed Chair in Cryogenics
UCLA Engineering has established the Traugott and Dorothea Frederking Endowed Chair in Cryogenics. The chair will support junior faculty for terms up to five years as they build their careers in areas related to cryogenics.
Lake Shore Cryotronics CEO appointed to PECSEA
Michael Swartz, CEO of Lake Shore Cryotronics, Inc., was appointed to the President's Export Council Subcommittee on Export Administration (PECSEA) by US Commerce Secretary Gary Locke earlier this month.
ADVERTISEMENT
Mixed Refrigerant Cycles
Most cryogenic refrigeration systems, both large scale systems and cryocoolers, use helium as a working fluid. There are a number of advantages to helium, not the least of which is that helium remains a fluid down to the lowest achievable temperatures. In order to freeze helium, pressures of over 20...
Fountain Pumps and He II Phase Separators
Helium II (He II), the second liquid phase of the 4He isotope described in this column in Cold Facts Spring 2010 (http://2csa.us/he2), can be modeled as consisting of two interpenetrating fluids. One, the superfluid component, has zero viscosity and entropy and the other, the normal fluid component, has nonzero viscosity...
Turboexpanders
A vital technology in the refrigerators and liquefiers described in Cold Facts Volume 31 Number 3 is that of turboexpanders. These devices are rotating machines in which the process fluid (e.g., helium) does work against the turboexpander while moving from high pressure to a lower pressure and thus is cooled....
Air Separation and Liquefaction
by Nils Tellier, PE, President, EPSIM Corporation (CSA CSM) nils@epsim.us All illustrations courtesy EPSIM Corporation Background History of Air Separation and Liquefaction This section builds on a rich history of methods to develop deep refrigeration and cryogenic liquefaction during the 19th Century. You are encouraged to read Cryo Central’s History...
Bose-Einstein Condensate
A Bose-Einstein condensate, first proposed in 1925 by Albert Einstein based on work done by Satyendra Nath Bose (the same Bose from whom the term boson is derived), is a super-cold state of matter in which almost all of the individual atoms have “condensed” down to the lowest possible quantum...
Cold Technology for Pest Control
While it does not reach temperatures cold enough to be called cryogenic, carbon dioxide snow is at the heart of a new way of dealing with unwanted pests. It utilizes a quick freezing process that takes advantage of the properties of carbon dioxide snow and has a number of benefits...
Cryogenic Finishing
The following 3 articles discuss the uses and procedures of various type of cryogenic finishing. 1) By Robin A. Rhodes, Cryogenic Institute of New England, Inc. rrhodes@nitrofreeze.com Cryogenic Deflashing is employed to remove undesired residual mold flash that remains on molded parts after they are removed or ejected from the...
Any experience with Tungsten or Tantalum metal springs in a low temp environment?
I would like to use metal springs made of Tungsten or Tantalum in low temperature environment. Does anybody have any experience with such springs? More precisely, I would like to make compression springs by rolling tungsten or tantalum wire on a rod. I expect that, typically, the spring constant will...
Standards & specifications for pipe & tube couplings
I am interested in finding out more about cryogenic applications and what standards, specifications and test methods (ASTM, etc.) are required for qualification of pipe and tube couplings.
Looking for a test house to test the static coefficient of friction under cryogenic conditions
I am looking to find a test house that is capable of testing the static coefficient of friction under cryogenic conditions. We can be flexible on most of the test parameters, including the test coupon configuration, but we’re looking for a test house that can provide the following test environment:...
Approximating pressure changes over time in cryogenic cylinders
I am an Air Resources Engineer with the California Air Resources Board (CARB). My senior management has asked me to investigate approximating pressure changes over time in cryogenic cylinders that contain LNG. So far, I have taken a stab at the problem, seeking to take a back-of-the-envelope approach (as directed...